JTAG Wiggler Schematic Fix
Per has brought to my attention that the JTAG Wiggler schematic on the “JTAG Wigger Clone” page has an error. I jumbled up the P4/P3 connections on the parallel port when I was adapting the schematic in EAGLE (the schematic is based on this one http://jtag-arm9.sourceforge.net/circuit.txt). I have fixed this error in the JTAG Wiggler schematic image, and I also posted the EAGLE schematic file.
Thanks to Per for bringing up the error.
I apologize for this mistake and I’ll do my best to look out for them in the future.
